IPCAMERA / Network Surveillance Camera / Bullet Camera - EDS8012


  • High-gain 13 dBi antenna extends wireless connections up to 5-miles point-to-point
  • 802.11n wireless speeds to 300 Mbps on 2.4 GHz; to 90 Mbps at ½ mile for streaming surveillance video
  • Ultra-wide angle 1 MP lens captures high-resolution images over broader areas
  • Removable IRC filter and built-in IR LED illuminators for day/night monitoring in low light or total darkness
  • 360-degree 3-axis pivoting arm on AP locks for precise alignment, includes pole mounting kit and cable management


EnGenius Wireless IP Surveillance System is specifically designed and engineered to extend the network over great distances and to transfer streaming video at stable, robust wireless speeds in challenging point-to-point deployment environments that are difficult to reach. 

The Wireless IP Surveillance System is an affordable alternative to conventional surveillance deployments. Long-range wireless point-to-point surveillance networks offer a variety of benefits including lower hardware infrastructure and reduced maintenance costs. Additionally, the EDS8012 also enhances or expands an existing point-to-multipoint installation by directing it toward a centralized Access Point, offering the potential to speed deployments while saving reconfiguration time and costs.

Tethering a series of EnGenius 1-Megapixel Day/Night HD Bullet IP Surveillance Cameras to the AP gives you “eyes on” places you might not otherwise see—no matter how far away, with significantly better results than traditional non-tethered wireless surveillance setups.

The AP supports three operation modes — Access Point, Client Bridge, and WDS Bridge. This flexibility makes them a versatile solution for IT managers who may need to update or reconfigure their deployments as the needs of their network change. 

To address the threat of suspicious activity in places with multiple entry points, the IP Surveillance Camera supports a motion detected-trigger, which automatically activates a recording of the covered area or sounds a connected third-party alarm ensuring all activity is monitored so employees, deliveries, and other assets arrive and depart safely and on time. 

To document insurance claims or provide law enforcement with video evidence, the IP Surveillance Camera can snap 1280x720 HD JPEG images or record H.264/MPEG-4 and motion JPEG video clips at 30 frames per second and send them via the network to a hard drive or NAS. 

The camera adheres to the ONVIF standard, allowing for easy integration with other ONVIF-compliant third-party hardware and software available on the market. The included 16-channel Video Management Software (VMS) provides live view monitoring, record, playback and quick search features. Organizations that want to monitor enclosed areas where many blind spots are present can benefit from utilizing the VMS since it allows minimal personnel to monitor the property while still maintaining the highest level of security.

The IP camera integrates with third-party digital alarms, sensors or other electronic devices for real-time event warnings and alerts that can serve as a deterrent to continued suspicious activity. Connect the camera to an audible alarm that will sound when the camera’s motion/audio-in detector is triggered or to lighting or other sensors designed to activate when triggered. Send triggered event alerts directly to a smartphone or tablet via EnGenuis push notifications, ensuring a rapid response to in-progress events.

The camera includes a 12V/1A power adapter, and is also 802.3af-compliant so it can be powered via PoE (Power-over-Ethernet) from a PoE switch, helping to integrate with both older and more modern infrastructure. It features a 3-axis pivot mechanism with cable management bracket for a clean professional installation while protecting the camera’s wires from the elements.

Designed to withstand extremely harsh environmental conditions, the IP Camera is housed in an IP66-rated enclosure.


Strong Wireless Performance Over Broad Distances
Robust point-to-point and point-to-multipoint 802.11n wireless performance of up to 300 Mbps on the 2.4 GHz frequency band, and 90 Mbps at ½ mile, creates a dependable surveillance network across great distances. High-gain 13 dBi antenna extends wireless connections up to 4-miles point-to-point.

Constant Vigilance
The IP Camera’s ultra-wide angle 1 MP lens provides 30 fps, 1280x720 HD performance, clarity and versatility needed to monitor even the largest properties. Removable IRC filter and built-in IR LED illuminators offer clear image quality day or night in low light or total darkness up to 32-ft./10 m.

Ideal for Point-to-Point and Point-to-Multipoint Surveillance
Ideal for overcoming the challenges posed by hard-to-reach installations, those laid out asymmetrically or over wide areas, obstructed by buildings, or congested with heavy RF traffic. An affordable alternative to conventional wired surveillance deployments, this versatile, reliable and high-performing security solution is ideal for creating or extending surveillance coverage over long-ranges.

Flexible Deployment Modes based on Needs
Easily configure the Wireless IP Surveillance AP to accommodate specific modes based on user needs including Access Point, Client Bridge or WDS Bridge. Camera supports ONVIF standard for easy integration with 3rd party hardware and software.

Flexible Power Options with Power-over-Ethernet (PoE) Support
The Wireless IP Surveillance System supports PoE, which allows the AP to be powered via the included proprietary PoE injector and the IP Camera to be powered and connected directly via an Ethernet cable to an 802.3af-capable switch. PoE is especially useful for deployments where a power outlet may be scarce or unavailable such as in remote parking lots, under the eaves of roofs, or high on top of poles.

Monitor, Record and Search with 16-Channel Video Management Software (VMS)
Provides maximum video coverage for even the most far-reaching venues. Monitor up to 16 camera streams in real-time with included Video Management Software. View and monitor live feeds, record, and playback and quickly search archived video.

Motion and Audio Detection Triggers Provide Instant Proof
Motion and Audio-In Detection capabilities can be set to trigger recording or alert staff, giving them the irrefutable video evidence needed to initiate a recording of the event or, if necessary, call the authorities.

Alarm Alerts and Push Notifications
Integrate IP camera with 3rd party digital alarms, sensors or other electronic devices that activate when motion or audio-in detectors are triggered serving as an added deterrent to prolonged suspicious activity. Send view, record and received triggered event alerts directly to your smartphone or tablet for instant notification of events-in-progress with free downloadable App for Android and iOS.


acquistare cialis 5 mg online

cialis generico
Technical Specifications

1-MP Day/Night Bullet IP Surveillance Camera

Image Sensor
¼” 1-Megapixel Progressive Scan CMOS Image Sensor

Fixed Board Lens
Fixed-Focus, 4 mm @ F1.5

60° (diagonal)

Removable IR-Cut Filter

Minimum Illumination
Color (IR-Off): 0.5 lux @ F1.5
B/W (IR-On): 0 lux @ F1.5

IR Illuminator
12 pcs IR Illuminator LEDs, effective up to 32-feet/10 meters     

Shutter Time 
1/7.5 sec. to 1/24,000 sec.

Physical Interface (All-in-One Cable)
1 x RJ45 10/100 Base-T (802.3af PoE)
1 x Terminal Block for Digital Input/output
1 x Reset Button

Power Input
Power Input: 12V/1A/, PoE 48V

Video Compression 

2x Video Streams

Frame Rates
Up to 30 fps at 1280 x 720
Image Settings
Adjustable Image Size, Quality & Bit Rate
Configurable Brightness, Sharpness, Contrast, Saturation, Exposure
Flip & Mirror
Time Stamp & Text Caption Overlay
Manual/Auto Day & Night Mode

10/100 Mbps Ethernet, RJ-45
Power-over-Ethernet (PoE 802.3af class 2)


ONVIF Compatible (Profile S)

RF Connector
Reverse SMA Plug

Admin/User account level

Password Protection

Alarm & Event/Recording
Event Trigger
Motion/Audio-In Detection

Event Notification
Email/Push Notifications

Video Buffer Pre-Alarm & Post-Alarm
5-seconds pre-alarm/post-alarm

Schedule Recording

Event Actions
File Upload to NFS/SAMBA/FTP/SMT, EnGenius Cloud & Play Audio
Video Playback (PC/iPhone®/Android™)
EnGenius Simple Smart Recording (Only for EnGenius Cloud Series Routers/Gateways)

Mobile Apps Supported
iPhone/iPad/Android devices

Viewing System Requirements
Operating System
Microsoft Windows XP/2000/2003/Vista/2007/2008

Web Browser
IE, Safari, Chrome, Firefox, Opera

View Clients
Live viewing for up to 5 clients

Environmental & Physical

Temperature Range
Operating: -4° F to 122° F (-20°C to 50° C)
Storage: -40º F to 140º F (-40º to 60º C) 

Humidity (non-condensing)
Operating: 80% or less

IP66-Rated Enclosure

Dimensions & Weights
IP Camera (EDS5110) Device with Bracket
Weight: 1.65 lbs. (.75 kg)
Length:  10.82” (275 mm)
Width: 5.7” (145 mm) 
Height: 4.72” (120mm)



Technical Specifications

Long-Range Wireless 2.4 GHz Outdoor Client Bridge

RF: 2.4 GHz Frequency Band

IEEE 802.11b/g/n

Physical Interface
2 x 10/100 BASE-T Ethernet Ports
1 x Port supports 24V Proprietary PoE Input
1 x Port supports extension of an Internet signal
1 x Reset Button

LED Signal
1 x Power
1 x LAN 1
1 x LAN 2
1 x WLAN

Internal High-Gain Directional Antenna 
2.4 GHz (P1)
 - Average Antenna Gain: 13 dBi
 - Polarization: Linear
 - Azimuth Beam Width: 67° 
 - Elevation Beam-Width: 33°
 - VSWR: 1:2.0
2.4 GHz (P2)
- Peak Antenna Gain: 13 dBi
 - Polarization: Linear
 - Horizontal Beam Width: 61° 
 - Elevation Beam-Width: 35°
 - VSWR: 1:2.0

Operation Modes
Access Point
Client Bridge
WDS Bridge

Radio I
11b/g/n: 2.412-2.472 GHz

Data Rate 
Up to 300 Mbps on the 2.4 GHz band 

Transmit Power
Up to 26 dBm 
Up to 400 mW
Max Power is limited by regulatory power

Supported Radio Technologies
802.11b: Direct-Sequence Spread-Spectrum (DSSS)
802.11n: Orthological Frequency-Division Multiplexing (OFDM)
802.11n: with 5/10/20/40 MHz Channel Width
802.11n: with 5/10/20 MHz Channel Width
802.11b/g: with 5/10/20 MHz Channel Width

Supported Data Rates (Mbps) 
802.11b: 1, 2, 5.5, 11 
802.11g: 6, 9, 12, 18, 36,48, 54 
802.11n: 6.5~300 (MCS0 to MCS15)

Power Source (PoE Injector): 
 - 24V/.6A Proprietary Compliant Source
 - Active Ethernet (Power over Ethernet, PoE)
Power Consumption 7.2 W

Auto Channel Selection
 - Settings varies by Regulatory Domains

BSSID Supports Four (4) SSIDs
VLAN Tagging
Independent VLAN settings can be enabled/disabled
Any packet that enters the device without a VLAN tag will have a VLAN tag inserted via a PVID (Ethernet Port VID)
VLAN Pass-through over WDS Bridge

V1/v2c/v3 Support
MIB I/II and Private MIB

Compliant with IEEE 802.11e Standard

Other Management Features
Save Configurations as Default
Saves the customized configuration as the default value for different customer demands

Client Traffic Status
Reports various information in a timely manner as required by the administrator 

Control Features 
RADIUS Accounting
Helps operators to offload 3G to Wi-Fi seamlessly

CLI Comments Support
Settings vary by Regulatory Domains

Distance Control (Ack Timeout)
Multicast Supported

Wi-Fi Scheduler
Sets the Schedule for rebooting the device

WEP Encryption: 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP using AES)
Hide SSID in Beacons
MAC Address Filtering (up to 50 addresses)
802.1x Authenticator
Wireless STA (Client) Connection List
Reports various information in a timely manner as required by the administrator

Environmental & Physical

Operating Temperature
-4 °F to 140 °F (-20 °C to 60 °C)
Storage:  -22 °F to 176 °F (-30 °C to 80 °C)

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less

IP55-Rated Enclosure


Dimensions & Weights
EnStation2 AP/Client Bridge Device 
Weight: 1.03 lbs. (0.47kg)
Depth: 7.4” (190mm)
Height: 1.5” (38mm)

EDS8012-Wireless 2.4 GHz IP Surveillance Solution
Weight: 4.13 lbs. (1.87 kg)
Width: 14.25” (362 mm)
Length: 10.62” (270 mm)
Height: 6.33” (161 mm)
Master Carton
Weight: 24.17 lbs. (11.87 kg)
Width: 13.07” (332 mm)
Length: 21.73” (552 mm)
Height:  14.72” (374 mm)
No. of boxes per carton: 4

Package Contents
•    EDS5110 1-Megapixel Bullet IP Camera
•    12V/1A Power Adapter
•    Mounting Kit
•    RJ-45 Ethernet Cable
•    Quick Installation Guide
•    EnStation 2 Outdoor CPE
•    PoE Injector (EPE-1212) with Power Adapter (24V/.6A)
•    Pole/Wall Mounting Kit
•    Mounting Screw Set
•    Quick Installation Guide

1 Year

EDS8012 - Document and Datasheets Download

Copyright © 2013 EnGenius. All rights reserved.