DATACOM / Business Networking / Outdoor AP / Bridge - ENS500


Name:
Model:


  • High 400mW Wireless Power Delivers Long-Range Coverage
  • Up to 300Mbps Wireless Speed and Backward Compatible to 802.11a
  • Built-in Dual Polarity 10 dBi Directional Antenna Maximizes Wireless Connectivity
  • SSID-to-VLAN Tagging

DESCRIPTION


The ENS500 is a high-speed, long-range outdoor 802.11n Wireless N300 Client Bridge and Access Point that operates in the 5GHz frequency band so it avoids the congested wireless traffic from devices on the more commonly used 2.4 GHz frequency band. This makes the ENS500 an ideal solution for building-to-building wireless bridging, for stable streaming of video from connected IP security cameras in parking lots or garages back to a company network, or for sending data to outdoor digital signage. The ENS500 can also be used in other operational modes including as an Access Point to offer wireless network connectivity to a more defined outdoor venue rather than a more general outdoor area around it.

FEATURES


Designed to Withstand Harsh Environmental Conditions
IP65 rated weatherproof housing that ensures continued operation in harsh outdoor environments or in climates of extreme cold, heat or continuous moisture.
 
Installation Kit Included
Includes easy-to-install kit for mounting and proprietary PoE (Power-over-Ethernet) injector with adapter for connection to an Ethernet switch.
 
EZ Controller™
EZ Controller software for configuring, managing and monitoring multiple APs from one central location. Available as a free download. Click here for the latest version of EZ Controller

Specifications


Hardware
RF: 5 GHz Frequency Band (5.18 to 5.825 GHz)
Standard: IEEE 802.11a/n
Data Rate: Up to 300 Mbps
Memory: 64MB
Flash Memory: 16MB
Power Consumption: Up to 6.9W

Antenna
Internal 10 dBi directional antenna with Dual Polarization

Physical Interface
2 x RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button


Power Requirements 
Active Ethernet (Power-over-Ethernet)
Proprietary PoE Design
Power Adapter (United States) 24V/0.6A


Software


Operation Modes 
Access Point, Client Bridge, Client Router, WDS


WDS Detail
WDS AP
WDS Bridge


Management


Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-PSK using TKIP or AES)
Hide SSID in beacons
MAC Address Filtering, Up to 50 Fields
Wireless STA (Client) Connection List


QoS (Quality of Service) 
WMM (Wireless Multimedia)

Wireless / Network 
Auto Channel Selection
Distance Control (802.1x Ack timeout)
CLI (Command Line Interface) Supported
802.1X RADIUS Supplicant (Client Bridge Mode)
Multiple SSID (4 SSIDs), BSSID
WDS AP, WDS Bridge, WDS Station
Multicast Supported
VLAN Tagging, VLA Pass-through
Auto Reboot
Wi-Fi Scheduling


 


 

Environmental & Mechanical


Temperature Range
Operating: -4º~158ºF/-20ºC~70ºC
Storage: /-22Fº~176ºF/-30ºC~80ºC

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less

Waterproof
IP65-Rated Enclosure

Certifications 
FCC, IC


Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.

Dimensions & Weights


ENS500 Device 
Weight: 0.7 lbs.
Width: 3.9”
Length: 7.3”
Height” 1.14”

Packaging Dimensions & Weight
Weight: 1.56 lbs.
Width: 2.80”
Length: 12.20”
Height: 9.20”

Package Contents 
ENS500 Client Bridge/Access Point
Power Adapter
PoE Injector (EPE1212)
Pole Mount Set
Screw Set
Quick Start Guide
Technical Support Card

Warranty 
1 Year

ENS500 - Document and Datasheets Download

 
ENS500_Datasheet_20121115.pdf
 
ENS500 v1.5.5.rar
 
ENS500_D2R2_20130402.pdf
Copyright © 2013 EnGenius. All rights reserved.