DATACOM / Business Networking / Indoor AP / Bridge - EAP900H


acquistare cialis originale on line

cialis generico
  • Up to 28 dBm transmit power enabling long range connectivity
  • Supports IEEE 802.11a/b/g/n wireless standards with up to 450 Mbps data rate on each band
  • Six internal 5 dBi omni-directional MIMO antennas
  • Can be monitored with EnGenius EZ Controller™ software for Windows (Free online download)
  • Can be used with included power adapter or via PoE with PoE 802.3at - capable switches or injectors
  • SSID-to-VLAN Tagging


rescue inhaler otc

asthma rescue inhaler overuse side effects go

viagra prodej plzen


The EAP900H is a high-powered Dual band N900 Indoor Ceiling Mount Access Point for hotels, resorts, hospitals, office buildings, universities, or other multi-building campus environments or large homes that need to extend and expand an existing network wirelessly. The EAP900H supports large file transfers and HD media streaming, as well as PMKSA support that ensures seamless handovers of a client device’s active sessions from one EAP900H access point to another to maintain a reliable connection to the network so hotel guests, patrons, employees, doctors, staff and others can maintain constant connection and watch video or transfer files without interruption no matter where they roam within a large, multi-story facility.

The EAP900H is an ideal solution for expanding an existing network, delivering wireless speeds up to 450 Mbps on each frequency band and featuring a Gigabit port to offer greater bandwidth capacity and faster data transfers throughout the network while drawing up to 25 watts of power. Featuring an aesthetic low-profile smoke detector design, the EAP900H mounts easily on a ceiling and unobtrusively blends in with other common building infrastructure appliances. The combination of high transmit RF power and an internal MIMO antenna array for enhanced receive sensitivity extends wireless coverage and enhances connectivity to client devices such as wireless laptops, tablets and smartphones, in areas where connections have previously been challenging or non-existent.. This Dual band Wireless N900 Access Point enables companies to connect to more employees, guests, staff or students who transfer large files within the network or use other bandwidth intensive applications like streaming HD video.

EZ Controller™ software for Windows, Mac OS X or Linux provides a suite of tools for IT managers, installers and network administrators to manage and maintain wireless networks. Available as a free download. Click here for the latest version of EZ Controller


Concurrent Dual band 450+450Mbps Support
802.11n dual radio concurrent operation in both 2.4 GHz and 5 GHz for maximum wireless throughput performance

Extends the Network Further
Acts as an extension of an existing home or small business network for video streaming, voice & data intensive applications.

Simplified Wireless Network Management
SNMP-based wireless access point monitoring and management software - EZ Controller™ (available as a free download) 
Click here for the latest version of EZ Controller

Band Steering
Automatically detects 5 GHz-capable clients and pushes them to the 5 GHz band to relieve network congestion and maintain optimal data traffic flow for both bands.

SSID-to-VLAN Tagging
Can be configured to broadcast up to eight (8) SSIDs (4 SSIDs per frequency band). Each SSID can be tagged to a specified company network VLAN for different user access based on established access rights.

802.3at PoE Compatible for use with 802.3at-CAPABLE PoE switches or injectors only
Supports Power over Ethernet (IEEE 802.3at) and allows deployment in areas where power outlets are not available. The EAP900H draws 25 watts of power.


abortion procedure

when is it too late for an abortion click here
RF: 2.4 and 5 GHz Frequency Bands
Standard: IEEE 802.11a/b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 450 Mbps in both frequency bands
Memory: 64MB
Flash Memory: 8MB
Power Consumption: Up to 22W

Six (6) Internal 5 dBi Omni-Directional Antennas

Physical Interface
1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps)
1 x Reset Button
1 x Power Connector

Power Requirements 
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A


Operating Channels
2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165



Operation Modes 
Access Point, WDS Bridge, WDS Access Point

Multiple BSSID 
Supports up to 8 BSSIDs per radio

IP (check validity and DHCP server IP range) MAC

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging

Spanning Tree
Supports 802.1d Spanning Tree Protocol

Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only

WMM (Wireless Multimedia)

Pass-through (PPTP, L2TP, IPSec)

Software only



Tx Power Control
Adjust transmit power by dBm

Web-based configuration (http)/Telnet

Telnet Server

Firmware Upgrade
Via web browser, settings are reserved after upgrade

Administrator Setting
Administrator Username and Password Change

Reset Setting 
Reboot (press 1 second).
Reset to factory default (press 10 seconds)

System Monitoring
Status Statistic and Event Log

V1, V2c, V3

MIB I, MIB II (RFC1213) and private MIB

Traffic Shaping 
Incoming and outgoing wireless traffic shaping

Auto-channel Selection
Automatically selecting least congested channel

Bandwidth Measurement 
IP range and bandwidth management

Auto Reboot
Reboot Access Point by minute, hour, day, or week

Backup and Restore
Save and restore settings through Web interface

Supports Command Line Interface

IP pinging statistics

SysLog and Local Log support

LED Control 

AP Detection
Scanning for available EnGenius APs

Wireless / Network 
PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode
(this function will keep trying when failed or disconnected)
PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks

Wireless Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 fields
L2 Isolation (Access Point mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)

QoS (Quality of Service) 
WMM (Wireless Multimedia)

Environmental & Physical

Temperature Range 
Operating: 0ºC to 50ºC (32ºF to 122ºF)
Storage: -20ºC to 60ºC (-4Fº to 140ºF)

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less


Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2014 EnGenius Technologies, Inc. All rights reserved. Compliant with FCC - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

Dimensions & Weights

EAP900H Device 
Weight: 0.62 lbs.
Diameter: 6.36”
Height: 1.64”

Package Contents
EAP900H Dual Band N900 Indoor Access Point
12V/2A Power Adapter
T-Rail Mounting Kit
Ceiling Mount and Wall Screw Kit
Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide

1 Year

EAP900H - Document and Datasheets Download

Copyright © 2013 EnGenius. All rights reserved.