This high-powered AP/CB is designed to expand the number of users and devices that can access an existing wireless network within large or multi-story buildings or expansive, client-intensive facilities like hotels, resorts, hospitals, office buildings, universities or other multi-building campus facilities that need to offer employees, guests, staff or students access to network resources like printers, content or the Internet.

The ECB300 can be configured to operate in several modes – as a Wireless-N Access Point, Client Bridge, WDS Access Point, WDS Bridge, Repeater, or AP Router.

The ECB300’s two detachable/upgradeable MIMO (Multiple In/Multiple Out) 5dBi antenna array results in enhanced receive sensitivity and connectivity to access points and wireless clients even in areas where connections have been previously challenging or non-existent. For deployments on ceilings or in crawlspaces where power outlets may be scarce, the ECB300 is also PoE (Power-over-Ethernet) capable when used with a PoE injector, like the 802.3af compliant EnGenius EPE5818af.

EZ Controller™ software for Windows, Mac OS X or Linux provides a suite of tools for IT managers, installers and network administrators to manage and maintain wireless networks. Available as a free download. Click here for the latest version of EZ Controller

Can be configured to broadcast up to four (4) SSIDs. Each SSID can be tagged to a specified company network VLAN for different user access based on established access rights.

Supports Power-over-Ethernet (IEEE 802.3af) and enables deployment in ceilings and other areas where power outlets may not be available. Optional (purchased separately): Recommended PoE Injector: EnGenius EPE5818af (802.3af compliant)

Includes 2x detachable omni-directional 5 dBi antennas.

Hardware

RF: 2.4 GHz Frequency Band

Standard: IEEE 802.11b/g/n

IEEE 802.11b/g: 2.400~2.484 GHz

Data Rate: Up to 300 Mbps

Memory: 32MB

Flash Memory: 4MB

Power Consumption: Up to 9W

Antenna

Two (2) External 5 dBi Omni-Directional SMA Antennas (diversity support)

Physical Interface

1 x RJ-45 Fast Ethernet (10/100 Mbps)

1 x Reset Button

Power Jack

LEDs Status

Power

LAN (10/100 Mbps)

WLAN (Wireless Connection)

Power Requirements 

Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz

(depends on different countries)

Active Ethernet (Power-over-Ethernet, IEEE 802.3af)

Power Adapter (United States) 48VDC/0.375A

Device: 12V/1A

Modulations 

OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK

Operating Channels

2.4 GHz: US/Canada 1-11

Receiver Sensitivity

802.11b (2.412~2.472 GHz) best ? -98 dBm

802.11g (2.412~2.472 GHz) best ? -93 dBm

802.11n (2.412~2.472 GHz) best ? -93 dBm

Available Transmit Power

(Max. Power may be different depending on local regulations)

802.11b (2.412~2.472 GHz)

29 dBm @ 1~11 Mbps 

802.11g (2.412~2.472 GHz)

29 dBm @ 6 Mbps

29 dBm @ 9 Mbps

28 dBm @ 12 Mbps

28 dBm @ 18 Mbps 

24 dBm @ 24 Mbps

24 dBm @ 36 Mbps

23 dBm @ 48 Mbps

23 dBm @ 54 Mbps 

802.11n (2.412~2.472 GHz)

26 dBm @ MCS0/MCS8

26 dBm @ MCS1/MCS9

25 dBm @ MCS2/MCS10

25 dBm @ MCS3/MCS11

24 dBm @ MCS4/MCS12

24 dBm @ MCS5/MCS13

23 dBm @ MCS6/MCS14

23 dBm @ MCS7/MCS15

Software

Topology 

Infrastructure/Ad-Hoc

Operation Modes 

Access Point, Client Bridge, WDS Bridge, WDS Access Point, WDS Station, Universal Repeater, Access Point Router, Client Router

Multiple BSSID 

Supports up to 8 BSSIDs

LAN

IP (check validity and DHCP server IP range) 

DHCP Server

DHCP range, lease time, client list

SSID-to-VLAN Tagging

Supports 802.1q SSID-to-VLAN tagging

Spanning Tree

Supports 802.1d Spanning Tree Protocol

Wireless 

Wireless Mode: 11b/11g/11n

Channel selection (settings vary by country)

Channel bandwidth (Auto, 20 MHz, 40 MHz)

Transmission rate:

2.4 GHz: 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only

QoS

WMM (Wireless Multimedia)

VPN

Pass-through (PPTP, L2TP, IPSec)

WPS

Software only

 

 

Management

Tx Power Control

Adjust transmit power by dBm

Configuration

Web-based configuration (http)/Telnet

Telnet Server

CLI

Firmware Upgrade

Via web browser, settings are reserved after upgrade

Administrator Setting

Administrator Username and Password Change

Reset Setting

Reboot (press 1 second).

Reset to factory default (press 10 seconds)

System Monitoring

Status Statistic and Event Log

SNMP

V1, V2c

MIB 

MIB I, MIB II (RFC1213) and private MIB

Traffic Measurement

Per interface

Auto-channel Selection

Automatically selecting least congested channel

Bandwidth Measurement

IP range and bandwidth management

Backup and Restore

Save and restore settings through Web interface

Diagnosis

IP pinging statistics

Wireless / Network 

PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode

(this function will keep trying when failed or disconnected)

PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks

Wireless Security

WPA/WPA2 Personal (WPA-PSK using TKIP or AES)

WPA/WPA2 Enterprise (WPA-EAP using TKIP)

802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP

SSID broadcast enable/disable

MAC Address Filtering, Up to 50 fields

L2 Isolation (Access Point mode)

Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)

Environmental & Physical

Temperature Range 

Operating: 0ºC to 50ºC (32ºF to 122ºF)

Storage: -20ºC to 60ºC (-4Fº to 140ºF)

Humidity (non-condensing)

Operating: 90% or less

Storage: 90% or less

Certifications 

FCC, IC

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.

Dimensions & Weights

ECB300 Device 

Weight: 0.77 lbs.

Length: 5.32”

Width: 4.14”

Height: 1.18”

Package Contents

ECB300 N300 Indoor Access Point/Client Bridge

12V/1A Power Adapter

RJ-45 Ethernet Cable

Quick Installation Guide

CD with User Manual

Warranty 

1 Year