DATACOM / Consumer Networking / Repeator / Bridge - ERB300H


  • 300Mbps (2.4GHz)
  • 2 x Detachable Antenna
  • 4 x 10/100 LAN Ports
  • 1 x Push Button for WPS/Reset
  • WEP/WPA/WPA2, WMM Supported
  • CB/ Repeater Modes


EnGenius ERB300H integrates your home media streaming wirelessly

EnGenius ERB300H equips 4 Fast Ethernet LANs and extended wireless coverage with two detachable 2dBi antennas, and WPS button design help user can setup the router without any complicated setting. The default 2 operation modes design makes ERB300H can be installed with different networking environment and applications


X-TRA RANGE family routers are special tailored for multi-media and high performance applications

EnGenius ERB300H is one of the member of X-TRA RANGE family series. The max. RF power is up to 26dBm for the reason to en-hance the signal and extend range to avoid dead spots for home multi-media and light-business user. ERB300H also equips 2 x exter-nal SMA antenna connector designed. User could change the high gain antenna by different demand.


2 x Operation Modes (Repeater / Client Bridge)

ERB300H supports 2 Operation modes. In the default Repeater mode, ERB300H is not only a HD Media bridge gateway to bridge your home media with excellent quality but also the Wireless Extender. The Client Bridge mode makes the ERB300H as a home wireless multi-media center. The 4 ports Ethernet designed can make more IP related device to enjoy the smoothly wireless connection.


Wireless LED Signal Indicator (Green / Orange / Red)

To easily identify where the best place for the ERB300H through the Wireless Signal LED Indicator. GREEN means GOOD. ORANGE means Normal. RED means POOR.

ERB300H Application 



Key Features

- IEEE802.11b/g/n, 300Mbps Wireless Speed

- X-TRA Range Technology Equipped

- 4 x FE Ports Designed

- Easy Connection via WPS Button

- 2 x Operation Modes (Client Bridge / Repeater)

- Wireless Signal LED Indicator

- QoS Wireless Multimedia (WMM)

Software Features

- System Log

- Wireless Client List

- Wireless Signal Indicator

- Operation Mode: Client Bridge/Repeater

- Channel Setting: Auto/Manual/Scan

- Output Power Control

- QoS (WMM) Wireless Multimedia


- Encryption: WEP/WPA/WPA2/TKIP/AES

- Hidden SSID

- MAC Address Filtering

- PPTP/IPSec/L2TP Pass-through

- Remote Control/Firmware Upgrade

- Backup/Restore Setting


Technical Specification

Physical Interface

- 4x 10/100Mbps LAN Ports

- WPS/Reset Button

- Power Switch

- 2x 2dBi SMA Antenna Connectors

Wireless Specification

- IEEE 802.11B/G/N, 300Mbps Wireless Speed

- Tx Output Power: 26±2dBm

- Rx Sensibility: -90dBm

(The Max. Power may be different depending on local regulations)

Hardware Specification

Dimension: 165mm x 120mm x 18mm (L x W x H)

Power Adapter: 12V, 1A

Package Contents

- 1x ERB300H

- 1x Power Adapter (12V/1A)

- 2x 2dBi SMA Antennas

- 1x RJ-45 Ethernet Cable

- Quick Installation Guide

- CD (User Manual)

Technical Support Card

ERB300H - Document and Datasheets Download

Copyright © 2013 EnGenius. All rights reserved.