DATACOM / Business Networking / Discontinued EOL - ENS1200


Name:
Model:


  • IEEE 802.11a/b/g/n/ac Dual Concurrent Architecture
  • Up to 27 dBm transmit power on the 2.4 GHz and 26 dBm transmit power on 5 GHz frequency bands, enabling long range connectivity
  • 802.11ac wireless speeds of up to 866 Mbps on the 5 GHz frequency band and 802.11n wireless speeds of up to 300 Mbps on 2.4 GHz band
  • Internal 5dBi high gain omni-patch antennas for both 2.4 GHz and 5 GHz
  • IP55-Rated waterproof housing for exposure to the elements

DESCRIPTION


Extend your wireless coverage to the outdoors with the high-powered ENS1200, an 802.11a/b/g/n/ac 2x2 long-range Dual Band Wireless AC1200 Outdoor Access Point with speeds up to 300 Mbps on the 2.4 GHz and 866 Mbps on the 5 GHz frequency bands that functions as a stand-alone Access Point or as part of an EnGenius Electron Series Solution of mix-and-match business-class networking products. Configurable in a number of operation modes, the ENS1200 can support a wide variety of applications, making it ideal for small-to-medium sized companies that wish to provide outdoor access to the company network for their employees or to provide network and/or Internet connectivity via a company’s existing broadband connection. 

Operating on both the 2.4 GHz and 5 GHz frequency bands and supporting 802.11a/b/g/n/ac standards, the ENS1200 features wireless speeds up to 300 Mbps on the 2.4 GHz and 866 Mbps on the 5 GHz frequency bands and a Gigabit port for connecting to 802.3at-capable PoE Switches. The ENS1200 is built with a higher signal strength and sensitivity than other Access Points in its class allowing for fewer access points required in a deployment. These specifications assist in reducing dead zones in a deployed WLAN and help boost received signal quality on both ends of the AP as well as client devices in the network.

In addition, the ENS1200’s internal MIMO antenna array is comprised of two (2) internal 5 dBi omni-directional high-gain antennas for 2.4 GHz and two (2) internal 5 dBi omni-directional high-gain antennas for 5 Ghz . This combination of high transmit power and enhanced receive sensitivity results in long range connectivity to client devices and in some venues can minimize the number of Access Points necessary for a deployment.

FEATURES


Flexible Deployment Scenarios
Choose one of two (2) modes available to the ENS1200 depending on user needs: Access Point or WDS (AP, Station,& Bridge).

Simplified AP Monitoring and Management
For easier monitoring and maintenance after deployment on rooftops and other hard to reach places, users can monitor the Access Point remotely with SNMP-based EZ Controller wireless Access Point software for Windows, Mac OSX, and Linux (available online as a free download).

Combat the Elements with IP55-Rated Waterproof Housing
Designed to withstand harsh environmental conditions via its waterproof IP55-Rated housing.

SSID-to-VLAN Tagging
Built-in 5 dBi high gain internal antennas for each band.

Specifications


Technical Specifications


Hardware
Standard: IEEE 802.11a/b/g/n/ac
Data Rate: Up to 300 Mbps on 2.4 GHz, up to 866 Mbps on 5 GHz
IEEEE 802.3at


Transmit Power
2.4 GHz: 27 dBm
5 GHz: 26 dBm
Maximum power is limited by regulatory power


Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n/ac: 2x MIMO with 2 Streams
802.11ac with 20/40/80 MHz Channel Width
802.11n with 20/40 MHz Channel Width
802.11a/b/g with 20 MHz Channel Width

Supported Modulation Types
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.1ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Supported Data Rates (Mbps): 
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5~300 Mbps (MCS0 to MCS15)
802.11ac: 6.5~866 Mbps (MCS0 to MCS9, NSS= 1 to 3)


Power Source
802.3at Compliant Source
Active Ethernet (Power over Ethernet, PoE) 

Antenna Array
Internal 5 dBi Dual Concurrent Omni Antenna
Polarization: Linear
Azimuth Beam-Width: 360°
Elevation Beam-Width: 2.4 Ghz: 45°, 5 GHz: 40°


LED Indicator
Power
WLAN (2.4GHz)
WLAN (5GHz)
LAN1
LAN2

Physical Interface
2 x RJ-45 Fast Ethernet (10/100/1000 Mbps)
1 x Reset Button


Power Requirements 
Active Ethernet (Power-over-Ethernet)
Proprietary PoE Design
Power Adapter (United States) 24V/0.6A


Software


Operation Modes 
Access Point, WDS


WDS Detail
WDS AP
WDS Bridge


Management


Security
WEP Encryption 64/128/152 bit
WPA/WPA2 AES/TKIP (WPA-EAP using TKIP)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Supplicant (Client Bridge Mode)
Hide SSID in beacons
MAC Address Filtering, Up to 32 MACs per SSID
Wireless STA (Client) Connected List
Https
SSH


QoS (Quality of Service) 
Complaint with IEEE 802.11e Standard

Wireless / Network 
Auto Channel Selection
Distance Control (802.1x Ack timeout)
Band Steering
CLI (Command Line Interface) Supported
802.1X RADIUS Supplicant (Client Bridge Mode)
Multiple SSID (4 SSIDs), BSSID
WDS AP, WDS Bridge, WDS Station
Multicast Supported
VLAN Tagging, VLA Pass-through, VLAN Pass-through over WDS Bridge Mode
Wi-Fi Scheduling
SSIDs
BSSID Support
Supports 16 SSIDs (8 SSIDs per band)
Save Configuration as Default
Client Traffic Status
Guest Network
Firmware Upgrade: Via web browser, settings are reserved after upgrade
Reset & Backup:  Reset to factory default. User can export all setting into a file via Web
RADIUS Accounting


Control Features
CLI Support
Distance Control (Ack timeout)
Multicast Supported
Wi-Fi Scheduler/Auto Reboot
Fast Roaming
Fast Handover
SNMP v1/v2c/v3
MIB I/II, Private MIB
Email Alerts

Environmental & Mechanical


Temperature Range
Operating: -4º~140ºF/-20ºC~60ºC
Storage: /-22Fº~176ºF/-30ºC~80ºC

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less

Waterproof
IP55-Rated Enclosure

Certifications 
FCC, IC


Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on distance between devices or traffic and bandwidth load in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2014 EnGenius Technologies, Inc. All rights reserved. Compliant with FCC - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.


Dimensions & Weights


ENS1200 Device 
Weight: 1.89 lbs.
Width: 7.3”
Length: 11.81”
Height” 1.34”

Package Contents 
ENS1200 Dual Band AC1200 Outdoor Access Point
PoE Injector (EPE-48GR)
Pole Mounting Bracket
RJ45- Ethernet Cable
Quick Installation Guide


Suggested Products
EGS7252FP 48-Port Gigabit PoE+ L2 Managed Switch with 4 Dual-Speed SFP
EGS7228FP 24-Port Gigabit PoE+ L2 Managed Switch with 4 Dual-Speed SFP
EGS7228P 24-Port Gigabit PoE+ L2 Managed Switch with 4 Dual-Speed SFP
EGS5212FP 8-Port Gigabit PoE+ Layer 2 Switch with 2 Gigabit Uplink Ports & 2 Dual-Speed SFP

Warranty 
1 Year

ENS1200 - Document and Datasheets Download

 
ENS1200_Datasheet_141107.pdf
Copyright © 2013 EnGenius. All rights reserved.