DATACOM / Business Networking / Discontinued EOL - EGS7228P


Name:
Model:


  • 24 Gigabit ports with IEEE 802.3af/at PoE Support
  • 4 Available SFP Slots
  • Internal Power Supply with 185w PoE Budget
  • PoE Management
  • IGMP Snooping v1/v2
  • IEEE 802.3ad Link Aggregation
  • Port Mirroring / Port Trunking

DESCRIPTION


The EnGenius EGS7228P is a Layer 2 Managed PoE Switch ideal for Access Points and IP Surveillance applications. It offers 24 Gigabit ports with IEEE802.3 AT PoE support on all its Gigabit ports and 4 SFP slots for fiber uplinks. This simple but powerful PoE switch is compliant with the IEEE802.3at/af standard, delivering up to 30 watts over connected Ethernet cables to power devices like Wireless Access Points, IP Cameras, and VoIP (Voice-over-IP) Phone Systems.

For manageability, the EGS7228P supports VLAN, QoS and IGMP Snooping features for priority-based applications, such as IP surveillance or video/voice transitions. The switch also offers PoE
Management on its Gigabit ports and priority-based configuration.

FEATURES


  • 24 Gigabit ports with IEEE 802.3at/af PoE Support
  • 4 Available SFP Slots
  • Internal Power Supply with 185w PoE Budget
  • PoE Management
  • IGMP Snooping v1/v2/v3
  • IEEE 802.3ad Link Aggregation
  • STP/RSTP/MSTP Spanning Tree Protocols

Specifications


Standard
Switching Capacity: 56Gbps
Forwarding Mode: Store and Forward
SDRAM: 128MB
Flash Memory: 16MB

Port Functions
24 10/100/1000Mbps Ports in the front panel
4 100/1000Mbps SFP Slot
1 RJ45 Console Port

PoE Capability
PoE standard: Port 1~24 Support IEEE 802.3at/af
PoE Capable Ports: Port 1~24 can output up to 30W
Power budget: 185Watts

LED Indicator 
Device:
Power LED x1
Fault LED x1
PoE Max LED x1
LAN Mode LED x1
PoE Mode LED x1
Copper Ports:
LAN/PoE Mode, Link/Act
SFP Ports:
Link/Act

Environment & Mechanical
Temperature Range
Operating: 32 to 104°F / 0 to 40°C
Storage: -40 to 158°F / -40 to 70 °C
Humidity (non-condensing)
5% - 95%
 

L2 Features

802.3ad compatible Link Aggregation
Port Mirroring
Port Trunking
Spanning Tree Protocol
 802.1D Spanning Tree (STP)
 802.1w Rapid Spanning Tree (RSTP)
 802.1s Multiple Spanning Tree (MSTP)
IGMP Snooping v1/v2/v3
IGMP Fast Leave
VLAN Group
Voice VLAN
MLD Snooping
Queue
 CoS based on 802.1p priority
 CoS based on physical port
 CoS based on TOS
 CoS based on DSCP
802.1X Port-based Access Control
802.1X Guest VLAN
Port security
Storm control
Port Isolation
Attack Prevention
Access Control List (ACL)
PoE management
 Power on/off per port
 Power class configuration
 Power feeding with priority
 User defined power limit
Telnet Server
TFTP Client
BootP/DHCP Client
Web-based support
SNMP v1 support
SNMP v2c support
SNMP v3 support
TFTP upgrade
Command Line Interface (CLI)
SNTP
RMONv1
SYSLOG
Cable Diagnastic
MIB Support
RFC1213
RFC1493
RFC1757
RFC2674

 
Maximum data rates are based on IEEE 802.3ab standards. Actual throughput and range may vary depending on distance between devices or traffic and bandwidth load in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved. Compliant with FCC - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

EGS7228P - Document and Datasheets Download

 
Datasheet_EGS7228P_20130822.pdf
 
EGS7228P v1.05.05.rar
Copyright © 2013 EnGenius. All rights reserved.