DATACOM / Business Networking / Discontinued EOL - EGS5110P


Name:
Model:


  • 8 Gigabit ports with IEEE 802.3at/af PoE support
  • 2 SFP slots
  • 130w PoE Budget
  • PoE Management
  • Loopback Detection
  • IGMP Snooping
  • Bandwidth Control

DESCRIPTION


The EGS5110P is a Smart PoE+ Switch that offers 8 Gigabit ports with IEEE802.3at/af PoE Support on all its ports and 2 SFP slots for fiber uplinks. The switch up to 30 watts per port over connected Ethernet cables to powered devices for a total PoE budget of 130 watts. It also supports VLAN, QoS and IGMP Snooping features for priority based application, such as IP surveillance or video/voice transitions. It also offers PoE Management on all its Gigabit ports and priority-base configuration.

EnGenius Smart PoE (Power-over-Ethernet) Gigabit Switches are specifically designed to meet the needs of start-up and small-to-medium sized businesses. For companies that need a way to connect and power VoIP phone systems, IP Cameras and Wireless Access Points throughout their facilities, these robust and fully-managed, yet cost-effective switches will help to keep their employees connected, safe and productive.

EnGenius switches also include embedded QoS intelligence to prioritize delay-sensitive services such as voice and video, simplify unified communications deployments, and help ensure consistent network performance for all services. For example, automated voice VLAN capabilities let you plug any IP phone into your IP telephony network and receive an immediate dial tone.

FEATURES


  • 8 Gigabit ports with IEEE 802.3at/af PoE support
  • 2 SFP slots
  • 130w PoE Budget
  • PoE Management
  • Loopback Detection
  • IGMP Snooping
  • Bandwidth Control

Specifications


Standard Switching Capacity:

20 Gbps



Maximum Forwarding Rate (64kBytes)

14.88Mpps



Forwarding Mode

Store and Forward



Packet Buffer Memory

512Bytes



Flash Memory

4Mbytes



Port Functions

8 10/100/1000 Mbps Ports in the front panel

2 1000 Mbps SFP Slot



PoE Capability

PoE Standard

Port 1~8 Support IEEE 802.3at/af



PoE Capable Ports

Port 1~8 can output up to 30W



Power Budget

130 Watts



LED Indicators

Device

Power LED

Fault LED

PoE Max LED

LAN Mode LED

PoE Mode LED

 

Copper Ports

LAN/PoE Mode, Link/Act

SFP Ports

Link/Act

 

 

 

Temperature Range

Operating

32 to 104°F / 0 to 40°C

Storage

-40 to 158°F / -40 to 70 °C

Humidity (non-condensing)

5% - 95%

 

Loopback Detection

IGMP Snooping v1/v2

Port Trunking

Port Mirroring - one to one and many to one

Static MAC Address

Dynamic MAC List

Bandwidth Control

802.1Q VLAN

Port-base VLAN

Storm Control

PoE Management

BootP/DHCP Client

Cable Diagnostic

 

 

Maximum data rates are based on IEEE 802.3ab standards. Actual throughput and range may vary depending on distance between devices or traffic and bandwidth load in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved. Compliant with FCC - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

EGS5110P - Document and Datasheets Download

 
Datasheet_EGS5110P_v1.0_APR_LA.pdf
 
EGS5110P v1.00.09.rar
 
EGS5110P User Manual.pdf
Copyright © 2013 EnGenius. All rights reserved.