DATACOM / Business Networking / Discontinued EOL - EGS2108P


Name:
Model:


  • 8 Gigabit Ethernet ports
  • IEEE 802.3af Support on Ports1-4
  • 61.6w PoE Budget
  • PoE Management on PoE Ports
  • Loopback Detection
  • IGMP Snooping
  • Bandwidth Control

DESCRIPTION



The EGS2108P enables office users to easily connect and supply power to Power over Ethernet devices such as IP cameras, IP phones, and Wireless Access Points on
a network. Ports 1-4 of the EGS2108P support the IEEE 802.3af PoE protocol. Each of these four ports can supply up to 30 watts for a total PoE budget of 61 watts.

The switch supports IEEE 802.1p QoS, which automatically classifies and prioritizes compliant device traffic to ensure that time-sensitive data such as VoIP packets are
forwarded without delay. In addition, the switch offers PoE Management on its PoE ports and also includes priority-based configuration.

FEATURES


  • 8 Gigabit Ethernet ports
  • IEEE 802.3af Support on Ports1-4
  • 61.6w PoE Budget
  • PoE Management on PoE Ports
  • Loopback Detection
  • IGMP Snooping
  • Bandwidth Control

Specifications


Technical Specifications

 
Standard
Switching Capacity: 16Gbps
Max. Forwarding Rate (64kBytes): 14.88Mpps
Forwarding Mode: Store and Forward
Packet Buffer memory: 512Bytes
Flash Memory: 4Mbytes
 
Port Functions
8 10/100/1000Mbps Ports in the front panel
 
 
PoE Capability
PoE standard: Port 1~4 Support IEEE 802.3af
PoE Capable Ports: Port 1~4 can output up to 15.4W
Power budget: 61.6 Watts
 
LED Indicator
Device:
Power LED x1
Fault LED x1
PoE Max LED x1
LAN Mode LED x1
PoE Mode LED x1
Copper Ports:
LAN/PoE Mode, Link/Act
 
 
Environment & Mechanical
 
 
Temperature Range
Operating: 32 to 104°F / 0 to 40°C
Storage: -40 to 158°F / -40 to 70 °C
 
Humidity (non-condensing)
5% - 95%
 

L2 Features


Loopback Detection
IGMP Snooping v1/v2

Port Trunking

Port Mirroring: one to one and many to one

Static MAC Address

Dynamic MAC List

Bandwidth Control

802.1Q VLAN

Port-base VLAN

Storm Control

PoE Management

BootP/DHCP Client

Cable Diagnostic


 

Maximum data rates are based on IEEE 802.3ab standards. Actual throughput and range may vary depending on distance between devices or traffic and bandwidth load in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved. Compliant with FCC - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

EGS2108P - Document and Datasheets Download

 
Datasheet_EGS2110P_v1.0_APR.pdf
Copyright © 2013 EnGenius. All rights reserved.